Dots, Coins and Die-Cut Shapes

Adhesive Hook and Loop Dots

Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Material	Nylon
Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Material	Nylon
Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	2-3 weeks after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

Size	Colour	MOQ
	Black	500 pcs stock colour / 3,000 pcs dyed
x 3 m		500 pcs stock colour / 3,000 pcs dyed
	Black	500 pcs stock colour / 3,000 pcs dyed
	Red	500 pcs stock colour / 3,000 pcs dyed
10 mm	Black	500 pcs stock colour / 3,000 pcs dyed
12 mm	Black	500 pcs stock colour / 3,000 pcs dyed
15 mm	Red	500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.02 – 0.35 / pcFOB Xiamen · varies with width and order quantity

A liner-backed sheet of adhesive hook and loop dots: the standard diameters across, a stock colour, positioned on the web within plus or minus 0.5 mm so a pick-and-place head does not have to search for the part. Standard diameters run from 10 mm to 50 mm, and anything outside that is a new die rather than a slitting instruction. Send the drawing and we quote the tooling and the part together, because the tooling is a one-off and the part is not.

Where it is used

Typical work is fixing small parts in a repeat assembly: sensor pads, cable clips, badge holders, and removable panels on consumer products. The liner is what makes it a production part rather than a repair item — the operator peels and places in one motion.

Ordering

Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.

How to specify it

The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.

Quality control

Each carton is labelled with the lot number, width, colour and quantity, and the lot report references the same number. That is what makes a claim traceable six months later instead of a conversation about photographs.

Packing and shipping

Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.

Send the annual volume with the first enquiry, even if it is a range. Volume changes the put-up, the slitting plan and sometimes the yarn, and the same construction quoted at 500 m and at 50,000 m is not the same job.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.

Read next Specifying die-cut hook and loop parts

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Kiss-cut or loose parts?

Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.

What tolerance can you hold?

±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Dots, Coins and Die-Cut Shapes

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots, Melt Glue Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Double-Sided Mounting Adhesive Hook and Loop Dots Double-Sided Mounting Adhesive Hook and Loop Dots in stock colours. Woven hook... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Waterproof Adhesive Hook and Loop Dots Waterproof Adhesive Hook and Loop Dots in stock colours. Woven hook and loop,... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes 12 mm Adhesive Hook and Loop Dots, Black Adhesive Hook and Loop Dots at 12 mm in Black. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed